Important Safety Instructions

1.Important Safety Instructions

  • The power cord shall be connected to socket-outlet with earthing connection.
  • The power supply should be installed near the equipment, and the socket-outlet must be easily accessible.
  • Only use the power cord provided by the manufacturer. Using unauthorized power cords may cause danger and violate the authorization of the product and the guarantee.
  • The power cord plug is considered as the disconnect device. Once unplugged, the product is considered to be disconnected from the power source.
  • Do not use the device in an environment where the temperature is too high or low. Never expose the device to strong sunshine or wet environments.
  • The suitable temperature range for the product and its accessories is 59℉-95℉/ 15℃-35℃.
  • It is recommended to operate the device in an environment with a temperature that ranges from 59℉/15℃ to 77℉/25℃.
  • When operating, place the device in an environment that has a normal room temperature and good ventilation.
  • This equipment is not suitable for use in locations where children are likely to be present. This equipment is not intended for use by children.

CAUTION - Moving parts. Keep body parts away from moving parts.

CAUTION - Hot parts. Do not touch.
  • Do not use the product in any way other than described herein in order to avoid personal injury or property damage.
  • User should comply with the laws and regulations of his/her corresponding country and region where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Our company will not be responsible for any violators' legal liability under any circumstances.
Unresolved icon
119 undefined
TroubleShooting
Daily Maintenance
FAQ
Part Replacements
Manual
Get Started
How to Fix WiFi Connection Issues?
29444 views2 likes/2025-04-07 18:26:11
How to Fix the Extruder Filament Feeding Issue
22080 views2 likes/2023-03-14 09:55:35
How to Fix Auto-Level Errors for M5
102 views1 likes/2026-08-14 16:11:08
How to Fix Homing Fail Issue
3954 views1 likes/2025-04-07 18:05:40
How to Fix a Clogged Extrusion Gear
3693 views3 likes/2025-04-08 13:37:22
Abnormal Heating of the Nozzle or Hot Bed
105 views1 likes/2026-08-14 16:11:09
Filament Cannot Pass the Filament Detection Sensor of M5
3359 views9 likes/2025-04-07 18:25:03
Analyzing Bottom Layer Error
3690 views3 likes/2024-05-30 17:46:41
How to Fix the Data Transmission Error
1948 views2 likes/2025-04-07 18:24:26
Download icon
M5C X Axis Belt Adjuster.gcode
Download icon
Ankermake Studio Guide(V1.5.21)
Download icon
M5C Y axis belt adjuster.gcode
Download icon
V8110 AnkerMake M5C EU Declaration of Conformity
Download icon
V8110_UK Declaration of Conformity
Download icon
M5C Y Axis Belt Adjuster.gcode
View More
Play videoHow to Replace the Air Guide of the Print Model Fan
How to Replace the Air Guide of the Print Model Fan
Play videoHow to Replace the Print Model Fan
How to Replace the Print Model Fan
Play videoAuto Leveling
Auto Leveling
Play videoV Wheel Adjustment
V Wheel Adjustment
Play videoHow to Transfer Files and Start Printing
How to Transfer Files and Start Printing
Play videoLoading Filament
Loading Filament
View More