FCC Statement 

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 

 

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 

 

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 

 

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. 

 

FCC Radio Frequency Exposure Statement 

 

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm. 

 

Notice: Shielded cables 

 

All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. 

 

The following importer is the responsible party 

 

Company Name: Fantasia Trading LLC  

 

Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764

 

Telephone: 1-800-988-7973

 

IC Statement

 

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 

 

(1) this device may not cause interference, and 

 

(2) this device must accept any interference, including interference that may cause undesired operation of the device. 

 

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 

 

(1) l'appareil nedoit pas produire de brouillage, et 

 

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

 

This Class B digital apparatus complies with Canadian ICES-003. 

 

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 

 

IC RF Statement: 

 

When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. 

 

Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matière d'exposition RF.

 

Notice (EU and the United Kingdom)

 

This product complies with the radio interference requirements of the European Community. 

 

 

Declaration of Conformity 

 

Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.For the declaration of conformity, visit the website: https://ankermake.com. 

 

 

This product complies with the radio interference requirements of the United Kingdom 

 

Declaration of Conformity 

 

Hereby, Anker Innovations Limited declares that this device is in compliance with Radio Equipment Regulations 2017(SI 2017/1206). The full text of the UK declaration of conformity is available at the following internet address:https://ankermake.com.

 

RF exposure information: 

 

The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. 

 

Frequency bands and power are as below: 

 


 

The following importer is the responsible party (contract for EU matters): 

 

Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany

 

The following importer is the responsible party (contract for UK matters):

 

Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom 

 

 

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

 

 

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

 

Trademarks

 

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.