EufyMake

Maintenance

Related articles
Printing

11.Maintenance

If you encounter any failure or issue, it is imperative to fix it quickly and correctly. Regular maintenance can make your device last longer and avoid unnecessary outlays.

If you use the printer very frequently, smaller parts will wear and need replacing to keep it running to the best of its function. You are recommended to change them as soon as they need replacing, as this will prevent damage or wear to other parts.

Please visit support.ankermake.com for more detailed information whenever in need.

Spare Parts	Illustration	Potential Failure or Issue	Solutions
Nozzle		The nozzle is jammed by foreign objectives, and the extrusion is uneven. The nozzle is blocked and nothing can be extruded.	Regular Maintenance https://support.ankermake.com/s/article/Routine-Maintenance-of-Nozzles Spare Part Replacement Video： https://support.ankermake.com/s/article/How-to-Exchange-the-Nozzles Article： https://ankertechnologycompanyltd.my.site.com/ankermakerenexternal/s/article/How-to-Replace-the-Nozzle
Hot End		Hot end jam. Malfunction. Abnormal temperature display.	Video： https://support.ankermake.com/s/article/How-to-Replace-the-Hotend Article： https://ankertechnologycompanyltd.my.site.com/ankermakerenexternal/s/article/How-to-Replace-the-Hotend-of-M5
Silicone Shell		Cracked.	Replace with a new one.
Extrusion Motor / Reduction Gear		Debris buildup causes insufficient extrusion or nozzle jams.	https://support.ankermake.com/s/article/Maintenance-of-extrusion-motor-reduction-gear
X/Y-axis Belts		Sounds abnormal noise in the direction of the X/Y-axis. Misplacement issue of the print model.	Video： https://support.ankermake.com/s/article/X-and-Y-Axis-Belt-Adjustment Article： https://support.ankermake.com/s/article/How-to-Adjust-Belts-on-the-X-and-Y-Axis
Eccentric Nuts of the Extruder and Printing Platform		Sounds abnormal noise when the X/Y-axis moves. The nozzle vibrates.	Video： https://support.ankermake.com/s/article/V-Wheel-Adjustment Article： https://support.ankermake.com/s/article/How-to-Adjust-the-Eccentric-Nut-of-the-Extruder-and-Printing-Platform#content5
V-Wheel		Fuzzy and frayed. Wears. Sounds abnormal noise or vibrates when working.	Video： https://support.ankermake.com/s/article/How-to-Replace-the-V-Wheel-of-X-Axis https://support.ankermake.com/s/article/How-to-Replace-the-V-Wheel-of-Y-Axis Article： https://support.ankermake.com/s/article/How-to-Replace-the-V-Wheel-of-X-and-Y-Axis