Features and description
The Layer start artifacts are random, and the z-seam is highly visible.
Reasons, Diagnoses, and Solutions
- Improper Setting of Z-Seam Parameters Resulting in poor Z-Seam appearance
A. The seam position is not suitable
Diagnosis: Check the Seam parameters in Studio through Quality > Seam.
Solution: For angular models, it is recommended to use "Aligned" and select "Aligned" in Seam position. For surface models, it is recommended to use "Seam Painting" and then manually draw the Z-seam. Brush thickness can adjust the thickness of the Z-seam.
Aligned
Manually drawn Z-seam
B. The Printing Order of the Inner and Outer Walls is Incorrect
Diagnosis: Check Quality > Walls and Surfaces to verify the Studio parameter settings.
Solution: Use Quality > Walls and Surface to set the inner wall to print before the outer wall and fill.
- Improper Setting of Model Z-Seam Parameters Leading to Z-Seam Accumulation
A. High-Speed Printing Causes Delay in Retraction and Extrusion, Leading to Accumulation of Z-Seam Material
Solution: Use Speed to reduce the overall printing speed appropriately.
If none of the above methods can solve the problem, please contact us directly through us and provide logs (Me > About > Upload Log on the APP side, Upload Log on the device side), Gcode, STL model and phenomenon pictures for analysis.
