When to Level:

1. First Installation and Use: After firmware upgrade.
2. During Printing: If the first layer is not adhering properly, edges are warping, or layers are separating, it is necessary to level the first layer.
3. After Replacing Components: When replacing the nozzle, extruder components, hot end, hotbed, and other accessories, re-leveling is necessary.

Steps to Level:

1. Prepare the Device:
   1. Turn on the device.
   2. Check whether the PEI board is placed correctly.
      • Incorrect Placement:
        • PEI is placed on the limit buckle of the PEI board.
        • The PEI board is not aligned with the aluminum substrate.

Connect the Mobile App:

• Connect your mobile phone to the device via the AnkerMake app.
• Enter the device settings interface and click the "Auto-Leveling" function.

1. Wait for Leveling:
   1. Wait for the equipment to complete the 49-point leveling process.
2. Completion:
   1. Once leveling is complete, you are ready to print.

If the above steps do not resolve the issue, please contact us.