Reasons and Solutions for M5C X-axis Zeroing Failure

1. Software Version Update Error

• Issue: Firmware update error.
• Solution:
  • Verify if the firmware is correctly flashed.
  • Re-flash the firmware and check the X-axis zeroing again.

2. Check the Cable for Looseness

• Issue: Loose or faulty X-axis motor wire.
• Solution:
  • Open the left shoulder front cover, right shoulder front and rear cover.
  • Check if the X-axis motor wire is loose or faulty.
  • Re-insert the motor wire.
  • Reassemble the shell in reverse order.

3. X-axis Synchronous Belt Loose

• Issue: Loose X-axis timing belt.
• Solution:
  • Check if the X-axis timing belt is loose.
  • Adjust the timing belt tension. Reference:
•    How to Adjust the Belt of the X and Y Axis for the M5C Printer

If you have any questions,please get in touch with use at us for assistance.