Please note that the "M" logo will display one of the following three colors to indicate the printer’s current status: green, yellow, red, and off.
1. Green state A solid green light
The printer is in the idle state
The printer is auto-leveling (49-point detection, excluding heating process)
Extrusion/retraction (excluding heating process)
The printer is printing (excluding heating process)
A flashing green light
Powered on
Upgrading firmware
2. Yellow state A flashing yellow light
Nozzle/heated bed heating process
3. Red state A flashing red light
Device is experiencing an error, such as filament breakage, abnormal heating, file error, etc
4. Off state
Powered off
Please note that the Bluetooth/WiFi indicator light will display one of the following two colors to indicate the printer’s current status: green, red, and off.
1. Green state
A solid green light
Connected to Bluetooth/WiFi
A flashing green light
Connecting to Bluetooth/WiFi
2. Red state
A flashing red light
Issues connecting to Bluetooth/WiFi
3. Off state
Not connected to Bluetooth/WiFi
Buzzer Status
Beeping sound for one second
The printer has powered on completely
The Auto-leveling function has started/completed
The extrusion/retraction process has started/completed
The factory reset process has started/completed
If you have any further questions, please contact us for assistance.
