Please note that the M5C printer’s default button has the following functions depending on different scenarios:
I. Idle state (Preheating/No printing task)
Single Click: Starts printing the latest sliced file from the USB drive.
Double-Click: Reprints the last task.
Long Press 3s: Starts/ends the Auto-leveling function.
II. Active state (Leveling/Extruding/Printing)
Single Click: Pauses/resumes a task.
Pauses the current printing task.
When the M5C printer is paused (including power-off resumption, material-break resumption, or active pause), it resumes the current task.
Long Press 3s: Stops the current task.
Stops the current printing task, such as when the printer is in the middle of a printing task, power-off resumption, material-break resumption, or active pause.
III. Custom Function
On the right side of "Single Click", "Double-Click", "Long Press 3s", click the ">" button to open the dropdown menu and customize the button function according to your preferences ("Single Click", "Double-Click", "Long Press 3s")
Function:
Print the latest file from the USB drive
Reprint the last task
Auto-level
Zero
None
Steps:
1. Click the dropdown icon located next to the device name.
2. Select the Settings icon.
3. Select the Button Settings option.
4. Customize the functions according to your preferences.
If you have any further questions, please contact us for assistance.
