Features and description

The filling fracture is discontinuous, and the filling part model collapses

Reasons, judgments, and solutions

The printing temperature is not enough, and the wire melting speed cannot keep up when printing a large area of filling, resulting in unstable filling

Judgment method: check the model (filling area) size, and check the filling speed through Expert > Speed > Internal solid infill

Solution:

A. Increase the printing temperature by 5-10 ℃ within the allowable range of the printing material, and modify the printing temperature through Filament Settings > Temperature

B. Gradually reduce the fill printing speed at 25mm/s, modify the fill speed through Expert > Speed > Infill Speed, and view the fill printing effect.

The filling parameters (Density or Pattern) are set improperly, resulting in loose filling

Method: Check slice fill density and pattern through Expert > Strength > Fill

Solution:

A. Choose the appropriate filling density, generally recommended not less than 10%. (Can be adjusted according to actual printing needs)

Choose the appropriate filling pattern. It is generally recommended to choose grids and triangles instead of straight lines

Grid, triangle

Straight line

Consumables do not support fast printing

Solution: Use official recommended consumables or replace them with consumables suitable for fast printing

If none of the above methods can solve the problem, please contact us directly through us and provide logs (APP side through Me > About > Upload Log, device side through Setting > Upload Log), Gcode, STL model and phenomenon pictures for analysis.