How fast does AnkerMake M5C print
If you want to print faster, we recommend using "Fast Mode" to slicing and printing:
In this mode, we recommend using a 0.4mm nozzle and a layer thickness of 0.2mm, and 500mm/s speed and 5000mm/s² acceleration, all parameters have been tuned by AnkerMake engineers.
If you have any further questions, please contact us for assistance.
96 undefined
M5C X Axis Belt Adjuster.gcode
Ankermake Studio Guide(V1.5.21)
M5C Y axis belt adjuster.gcode
V8110 AnkerMake M5C EU Declaration of Conformity
V8110_UK Declaration of Conformity
M5C Y Axis Belt Adjuster.gcode
View More
How to Replace the Air Guide of the Print Model Fan
How to Replace the Print Model Fan
Auto Leveling
V Wheel Adjustment
How to Transfer Files and Start Printing
Loading Filament
View More
