This article is designed to provide collective solutions to solve common issues of the M5C printer. Please refer to the following issues and their corresponding solutions.

1. Print Head Blockage / Extruder Cannot Extrude Filament

1. When the print head is blocked, please refer to the following article for detailed instructions on how to fix the issue:

https://support.ankermake.com/s/article/How-to-Fix-a-Blocked-Nozzle-of-the-M5C 

2. When the extruder cannot extrude filament, please refer to the following article for detailed instructions on how to fix the issue:

https://support.ankermake.com/s/article/How-to-Fix-the-M5C-Printer-s-Extruder-Failing-to-Extrude-Filaments

2. Auto-Leveling Issue

When auto-leveling fails to work, please refer to the following article for detailed instructions on how to fix the issue:

https://support.ankermake.com/s/article/How-to-Fix-the-Auto-Leveling-Error-for-the-M5C-Printer 

III. Hot Bed and Nozzle Heating Issues

1. When the hot bed is experiencing heating issues due to a defective wire, please refer to the following article for detailed instructions on how to replace the hot bed wire:

https://support.ankermake.com/s/article/How-to-Replace-the-Hot-Bed-Wire-for-the-M5C-Printer

2. When the nozzle is experiencing heating issues due to data transmission error, please refer to the following articles for detailed instructions on how to fix the error:

2.1) Please unplug the Type-C cable and plug it in again to confirm if the issue can be solved.

https://support.ankermake.com/s/article/How-to-Fix-Data-Transmission-Error-for-the-M5C-Printer

2.2) If the Type-C cable is defective, please replace the Type-C cable.

https://support.ankermake.com/s/article/How-to-replace-the-Type-C-cable-for-the-M5C-printer

If you have any further questions, please contact us for assistance.