The Purifier P1 is an air purification accessory designed for the eufyMake E1 (V8260) UV Printer. It is purpose-built to improve air quality during UV printing by continuously treating the gases and odors produced during printing.
The Purifier P1 features a 4 kg high-density modified activated carbon filter and an industrial-grade HEPA 13 filter. Certified by SGS, it removes up to 99.54% of TVOCs, captures 99.97% of 0.3 μm fine dust particles, and captures 99.99% of PM2.5.
Its large-diameter, low-speed fan keeps noise levels at 55 dB or below in High mode and as low as 45 dB in Silent mode. It offers four operating modes: Silent, Standard, High, and Auto. These can be controlled using the buttons on the device or through the app. The purifier can also be linked with the printer to automatically start and stop with print jobs.
NFC smart filter recognition syncs usage data with the app, allowing you to easily check the remaining filter life.
Product Positioning
During printing, UV printers produce gases such as TVOCs. In enclosed or semi-enclosed spaces, prolonged use can cause these gases to accumulate and affect the comfort of the printing environment.
The Purifier P1 uses internal recirculation filtration to purify the gases produced during printing directly within the room, with no need to vent outdoors. It is suitable for fully enclosed, windowless spaces or environments where the printer cannot be placed near a window.
Package Contents & How It Works
The Purifier P1 filtration and purification accessory kit includes the following:
-
Purifier (with filter)
-
1.5 m exhaust duct
-
Power adapter
Note: The air guide must be purchased separately.
How It Works
-
The air guide plate fits against the printer's exhaust outlet, directing the gases produced during printing into the purification system.
-
The exhaust duct connects the air guide plate to the purifier and carries the gases to the purifier.
-
The purifier contains a 4 kg high-density modified activated carbon filter and an industrial-grade HEPA 13 filter. Using a 6-layer composite structure and multi-layer parallel pleating design, it captures gases and particles before releasing the purified air back into the room.
Product Dimensions
Main unit dimensions: 320 × 387 × 456 mm / 12.60 × 15.24 × 17.95 in (L × W × H).
Before purchasing, make sure there is sufficient space for the purifier and leave enough room for routing the exhaust duct.
Applicable Scenarios
-
Fully enclosed, windowless indoor studios.
-
Environments where the printer cannot be placed near a window and the exhaust duct cannot be routed outdoors.
-
Environments with a window where you prefer indoor air purification without venting outdoors.
-
If you have a window or opening that allows ventilation outdoors, you may also choose the Exhaust Fan Kit, which vents gases directly outside.
FAQs
Q: What problem does the Purifier P1 solve?
The Purifier P1 recirculates and purifies the air indoors, with no need to vent outdoors.
Q: How do I choose between the Exhaust Fan Kit and the Purifier P1?
If you have a window or opening that allows ventilation outdoors, choose the Exhaust Fan Kit. For fully enclosed, windowless spaces, choose the Purifier P1.
Q: Is it noisy during operation?
Noise levels are ≤ 55 dB in High mode and ≤ 45 dB in Silent mode, providing quiet and unobtrusive operation.
Q: How effective is odor removal when using the A3 platen or roll accessory for open-platform printing?
During open-platform printing, with the front and rear covers open, the purifier's suction draws the gases produced during printing into the air guide for purification. This effectively reduces odors even during open printing.
Q: Does it have a child lock?
No. This product does not support a child lock.
